产品名称：SC系列标准气缸 产品型号：SC50X25 SC50X50 SC50X75 SC50X100S 品牌： 亚德客（AiRTAC） 工作介质： 空气 作动方式： 复动型
规格：
| 内径： | 32 | 40 | 50 | 63 | 80 | 100 | |
| 动作型式： | 复动型 | ||||||
|
工作介质： |
空气（经40μm以上滤网过滤） | ||||||
|
固定型式： |
SC |
基本型 FA FB CA CB LB TC TCM1 |
|||||
| SCD、SCJ | 基本型 FA LB TC TC TCM1 | ||||||
| 使用压力范围： | 0.10~1.0MPa(15~145psi)(1.0~10.0bar) | ||||||
| 保证耐压力： | 1.5MPa（215psi）(15bar) | ||||||
| 工作温度（℃）： | -20~80 | ||||||
| 使用速度范围mm/s | 30~800 | ||||||
| 行程公差范围： | 0~250(0~+0.1) 251~1000(0~+1.4) 1001~1500(0~+1.8) | ||||||
|
缓冲型式： |
可调缓冲 | ||||||
| 缓冲行程： |
21 |
28 | 29 | ||||
| 接管口径： | PT1/8 | PT1/4 | PT3/8 | PT1/2 | |||
①接管牙型有NPT、G牙可供选择；
行程：
| 内径(mm) | 标准行程(mm) | 最大行程(mm) | 容许行程(mm) |
| 32 | 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 | 1000 | 2000 |
| 40 | 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 | 1200 | 2000 |
| 50 | 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 | 1200 | 2000 |
| 63 | 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 | 1500 | 2000 |
| 80 | 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 | 1500 | 2000 |
| 100 | 25 50 75 80 100 125 150 160 175 200 250 300 350 400 450 500 600 700 800 900 1000 | 1500 | 2000 |
1.Standard cylinder manufactured by our enterprise.
2.The seal of piston adopts heterogeneous two way seal structure. It’s dimension is tight and it has the function of grease reservation.
3.It is tie rod cylinder. The cylinder barrel and front/rear cap is jointed by tie rods with high reliability.
4. Compared with ISO15552 standard cylinder, SC series cylinder with the same bore size is shorter.
5. The buffer adjustment of cylinder is smooth and steady.
6.Cylinders and mounting accessories with several specifications are optional.
Installation & Usage:
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.
2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
5.The medium used by cylinder shall be filtered to 40μm or below.
6.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
7.The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports.
| SC125X80S | SC160X350S | SC250X800S | SC125-50 | SC160-175 | SC200-100 |
| SC125X125S | SC160X450S | SC250X900S | SC125-75 | SC160-200 | SC200-125 |
| SC125X160S | SC160X600S | SC250X1000S | SC125-80 | SC200X80 | SC200-150 |
| SC125X175S | SC160X700S | SC250X25S | SC125-100 | SC200X125 | SC200-160 |
| SC125X350S | SC160X800S | SC250X50S | SC125-125 | SC200X160 | SC200-175 |
| SC125X450S | SC160X900S | SC250X75S | SC125X150 | SC200X175 | SC200-200 |
| SC125X600S | SC160X1000S | SC250-80-S | SC125-160 | SC200X350 | SC250X80 |
| SC125X700S | SC160X25S | SC250X100S | SC125-175 | SC200X450 | SC250X125 |
| SC125X800S | SC160X50S | SC250-125-S | SC125-200 | SC200X600 | SC250X160 |
| SC125X900S | SC160X75S | SC250X150S | SC160X80 | SC200X700 | SC250X175 |
| SC125X1000S | SC160-80-S | SC250-160-S | SC160X125 | SC200X800 | SC250X350 |
| SC125X25S | SC160X100S | SC250-175-S | SC160X160 | SC200X900 | SC250X450 |
| SC125X50S | SC160-125-S | SC250X200S | SC160X175 | SC200X1000 | SC250X600 |
| SC125X75S | SC160X150S | SC250X300S | SC160X350 | SC200-25-S | SC250X700 |
| SC125-80-S | SC160-160-S | SC250X400S | SC160X450 | SC200-50-S | SC250X800 |
| SC125X100S | SC160-175-S | SC250X500S | SC160X600 | SC200-75-S | SC250X900 |
| SC125-125-S | SC160X200S | SC125X80 | SC160X700 | SC200-80-S | SC250X1000 |
| SC125X150S | SC160X300S | SC125X125 | SC160X800 | SC200-100-S | SC250-25 |
| SC125-160-S | SC160X400S | SC125X160 | SC160X900 | SC200-125-S | SC250-50 |
| SC125-175-S | SC160X500S | SC125X175 | SC160X1000 | SC200-150-S | SC250-75 |
| SC125X200S | SC250X80S | SC125X350 | SC160-25 | SC200-160-S | SC250-80 |
| SC125X300S | SC250X125S | SC125X450 | SC160-50 | SC200-175-S | SC250-100 |
| SC125X400S | SC250X160S | SC125X600 | SC160-75 | SC200-200-S | SC250-125 |
| SC125X500S | SC250X175S | SC125X700 | SC160-80 | SC200-25 | SC250-150 |
| SC160X80S | SC250X350S | SC125X800 | SC160-100 | SC200-50 | SC250-160 |
| SC160X125S | SC250X450S | SC125X900 | SC160-125 | SC200-75 | SC250-175 |
| SC160X160S | SC250X600S | SC125X1000 | SC160-150 | SC200-80 | SC250-200 |
| SC160X175S | SC250X700S | SC125-25 | SC160-160 |
