产品名称：2W系列直动常闭型电磁阀 产品型号：2WL050-10 2WL050-15 2WT050-10 2WT050-15 类型：电磁阀，先导常闭型电磁阀 品牌： 亚德客（AirTAC） 工作介质： 空气 位置数：二口二位
| 型号/规格: | 接管口径: | 流通孔径(Φmm): | Cv值 | 有效截面积(mm²): | 重量（g）: | 最大操作压差: | 最大耐压力: | |||
| MPa | psi | MPa | psi | |||||||
| 2WX030 | -06 | PT1/8 | 1.5 | 0.10 | 1.8 | 305 | 3.0 | 450 |
5.0 |
750 |
| -08 | PT1/4 | 295 | ||||||||
| 2WH030 | -06 | PT1/8 | 2.0 | 0.18 | 3.0 | 305 | 2.0 | 300 | ||
| -08 | PT1/4 | 295 | ||||||||
| 2W030 | -06 | PT1/8 | 3.0 | 0.33 | 6.0 | 305 | 1.0 | 150 | ||
| -08 | PT1/4 | 295 | ||||||||
| 2WL030 | -06 | PT1/8 |
4.0 |
0.55 | 10.0 | 305 | 0.5 | 75 | ||
| -08 | PT1/4 | 295 | ||||||||
| 2WT030 | -06 | PT1/8 |
6.0 |
1.10 | 12.0 | 305 | 0.1 | 15 | ||
| -08 | PT1/4 | 295 | ||||||||
| 2WX050 | -10 | PT3/8 |
3.0 |
0.34 | 6.1 | 620 | 3.0 | 450 | ||
| -15 | PT1/2 | 600 | ||||||||
| 2WH050 | -10 | PT3/8 |
4.0 |
0.55 | 10.0 | 620 | 2.0 | 300 | ||
| -15 | PT1/2 | 600 | ||||||||
| 2W050 | -10 | PT3/8 |
5.0 |
0.83 | 15.0 | 620 | 1.0 | 150 | ||
| -15 | PT1/2 | 600 | ||||||||
| 2WL050 | -10 | PT3/8 |
7.0 |
1.40 | 25.0 | 620 | 0.5 | 75 | ||
| -15 | PT1/2 | 600 | ||||||||
| 2WT050 | -10 | PT3/8 |
10.0 |
2.20 |
40.0 |
620 | 0.1 | 15 | ||
| -15 | PT1/2 | 600 | ||||||||
| 阀体型号: | 所配线圈型号: | 电源种类: | 电源频率(Hz)： | 容许电压变动 | 接电方式 | 功耗（VA/W） | 绝缘等级 | 温升(℃) |
| 2W□030 |
CDA116 CLA116 |
AC | 50 | ±15% |
DIN插座式(CAD) 出线式(CLA) |
10.0VA | Class B | 35 |
| 60 | 8.0VA | 30 | ||||||
| DC | - | ±10% | 6.5VA | 30 | ||||
| 2W□050 |
CDA170 CLA170 |
AC | 50 | ±15% | 25.0VA | 60 | ||
| 60 | 22.0VA | 55 | ||||||
| DC | - | ±10% | 10.5VA | 40 |
阀体规格:
| 作动方式: | 直动式 | ||||
| 初始状态: | 常闭型 | ||||
| 使用流体: | 空气、 水、油 | ||||
| 使用流体粘滞度: | 20CST以下 | ||||
|
环境及流体温度(℃): |
水 | 空气 | 油 | 环境 | |
| 最高温度 | 80 | 90 | 80 | 70 | |
| 最低温度 | 1 | -20 | -10 | -20 | |
1.Indirect acting(Internal pilot) and normally closed type 2/2 way solenoid valve. Its can change direction quickly and has large flow.
2.It is compact, small and light weight. It is easy to install and dismantle;
3.The valve body is made of brass . The coil has a Heat resistance classification of Class B. The standard seal material is FPM-F. Please contact us if other material are required.
4.The protection class of the coil is IP65 and there is a choice for grommet or terminal electrical entry.
Installation & Usage:
1.Check whether the components have been damaged during transportation before installing and using.
2.Pay attention to whether the flow direction of air (notice “→” direction) and thread type are correct.
3.Please notice whether installation condition accords with technical requirements (such as “working pressure” and “applied temperature range”);
4.Take measure to avoid vibration and frozen.
5.Before using the fittings and tubes make sure they are clean. When connecting tofittings, be sure the PTFE Thread Seal Tape is used correctly.
6.Keep the dust away. The dust cover shall be installed in intake and outlet when the device is dismantled and stored.
