Product Name: HFTP Series Air Finger Cylinder Product Model: HFTP10 HFTP16 HFTP20 HFTP25 HFTP32 Valve Type: Air Finger Cylinder, Air Gripper Cylinder Brand: AirTAC Fluid: Air Acting Type: Double Acting
Specification：
| Bore size: | 10 | 16 | 20 | 25 | 32 | ||
| Acting type: | Double Acting、Single Acting | ||||||
|
Fluid: |
Air(to be filtered by 40μm filter element) | ||||||
| Operating Pressure: | Double Acting: | Φ6、Φ10: | 0.20~0.7MPa（28~100psi）（2.0~7bar） | ||||
| Other: | 0.10~0.7MPa（15~100psi）（1.0~7bar） | ||||||
| Single Acting | Φ6、Φ10: | 0.35~0.7MPa（50~100psi）（3.5~7bar） | |||||
| Other: | 0.25~0.7MPa（36~100psi）（2.5~7bar） | ||||||
| Proof Pressure: | 1.05MPa（150psi）（10.5bar） | ||||||
| Temperature（℃）: | -10~70 | ||||||
| Lubrication: | Cylinder:Not Required Gripper Jaws:Lubricate Grease | ||||||
|
Max Gripping Length(mm): |
30 | 40 | 60 | 70 | 90 | ||
| Max Frequency: | 180(c.p.m) | 60(c.p.m) | |||||
| Sensor Switches: |
CS1-G DS1-G |
CS1-G\DS1-G、DS1-H | |||||
| Port Size: |
M3X0.5 |
M5X0.8 | |||||
1.A structure of lever type gripping is designed to reduce the cost under the premise of accuracy.
2.A sheet metal is installed between the finger and body to reduce abrasion and extend the service life.
3.The contact area between finger and body is enlarged to reduce shaking and enhance the gripping accuracy.
4.The finger clamps when the piston rod pushes out and stretches when the piston rod retracts. The gripping force is 20%~30% greater than the tensile force.
5.Can be mounted from three directions.
6.Magnet is included in the standard configuration.
| HFTP-10 | HFTP-20 | HFTP-32 | HFTP-16-N | HFTP-25-N |
| HFTP-16 | HFTP-25 | HFTP-10-N | HFTP-20-N | HFTP-32-N |
