Product Name: MD、MDD、MDJ、MSD、MTD Series Multi-Mount Cyclinder Product Model: MD32X25 MD32X30 MD32X40 MD32X50 MD32X60 Valve Type: Multi-Mount Cyclinder, Cyclinder Brand: AirTAC Fluid: Air Acting Type: Double Acting、Single Acting Push、Single Acting Pull
Specification：
| Bore size: | 6 | 10 | 16 | 20 | 25 | 32 | |
| Acting type: | MD/MDD/MDJ | Double Acting | |||||
| MSD/MTD | Single Acting Push、Single Acting Pull | ||||||
|
Fluid: |
Air(to be filtered by 40μm filter element) | ||||||
| Operating Pressure: | Double Acting: | 0.1~1.0MPa（15~145psi）(1.0~10.0bar) | |||||
| Single Acting: | 0.2~1.0MPa（28~145psi）(2.0~10.0bar) | ||||||
| Proof pressure: | 1.5MPa（215psi） | ||||||
| Temperature（℃）: | -20~80 | ||||||
| Speed rang (mm/s): | Double Acting: 30~500 Single Acting：50~500 | ||||||
| Stroke tolerance： | (0~+1.0) | ||||||
| Cushion Type: | Bumper | ||||||
| Port Size： | M5X0.8 | PT1/8 | |||||
① PT thread, NPT thread and G thread are available.
Stroke：
| Bore size(mm) | Standard Stroke(mm) | Max Stroke(mm) | Allow Stroke(mm) | |
|
6 |
Double Acting: | 5 10 15 20 25 30 35 | 35 | 40 |
| Single Acting: | 5 10 15 20 |
20 |
- | |
| 10 | Double Acting: | 5 10 15 20 25 30 35 | 35 | 40 |
| Single Acting: | 5 10 15 20 | 20 | - | |
|
16 |
Double Acting: | 5 10 15 20 25 30 40 50 | 50 | 70 |
| Single Acting: | 5 10 15 20 | 20 | - | |
| 20 | Double Acting: | 5 10 15 20 25 30 40 50 60 | 60 | 80 |
| Single Acting: | 5 10 15 20 | 20 | - | |
| 25 | Double Acting: | 5 10 15 20 25 30 40 50 60 | 60 | 80 |
| Single Acting: | 5 10 15 20 | 20 | - | |
| 32 | Double Acting: | 5 10 15 20 25 30 40 50 60 | 60 | 80 |
| Single Acting: | 5 10 15 20 |
20 |
- | |
① other special itinerary please contact with the company;
② The max range of non-standard travel range of more than a standard stroke restructuring, its dimensions for the previous standard stroke cylinder dimensions. Such as the stroke of 23 non-standard stroke cylinder is a standard stroke of 25 standard cylinder restructuring, its dimensions and the same.
1.Manufactured by our enterprise.
2.There are several ways to fix the cylinder and it is convenient to install and use.
3.Several cylinders can be assembled together to effectively save the installation space.
4.The guide precision of piston rod is high and no additional lubricant is needed.
5.Cylinders of various specifications are optional.
6.The seal material with high temperature resistance is adopted to guarantee the normal operation of cylinder at 150℃(Option).
Installation & Usage:
1. When load changes in the work, the cylinder with abundant output capacity shall be ed.
2.Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
3.Necessary protection measure shall be taken in the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
5.The medium used by cylinder shall be filtered to 40μm or below.
6.Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
7.The cylinder shall be carried out test run without load before application. Prior to run, buffer shall be turned to the minimum and gradually released to avoid the damage on cylinder caused by excessive impact.
8.The cylinder shall avoid the influence of side load in operation to maintain the normal work of cylinder and extend the service life.
9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust caps shall be added in air inlet and outlet ports.
| MD32X5 | MD32X30 | MD32X5S | MD32X30S |
| MD32X10 | MD32X35 | MD32X10S | MD32X35S |
| MD32X15 | MD32X40 | MD32X15S | MD32X40S |
| MD32X20 | MD32X45 | MD32X20S | MD32X45S |
| MD32X25 | MD32X50 | MD32X25S | MD32X50S |
