Product Name: HFC Series Parallel Open/Close Style Air Gripper Product Model: HFCI16 HFCI20 HFCI25 HFCI32 HFCI40 HFCI50 HFCI63 HFCY16 HFCY20 HFCY25 HFCY32 Valve Type: Air Gripper Brand: AirTAC Fluid: Air Acting Type: Double Acting
Specification：
| Bore size: | 16 | 20 | 25 | 32 | 40 | 50 | 63 |
| Acting type: | Double Acting | ||||||
|
Fluid: |
Air(to be filtered by 40μm filter element) | ||||||
| Operating Pressure: | 0.15~0.6MPa(28~87psi)(2.0~6.0bar) | 0.15~0.6MPa(22~78psi)(1.5~6.0bar) | |||||
| Temperature（℃）: | -10~60 | ||||||
| Repeatability mm: | ±0.01 | ||||||
| Lubrication: | Not Required | ||||||
| Max Frequency: | 120(c.p.m) | 60(c.p.m) | |||||
| Sensor Switches: | DS1-H, DS1-HL | ||||||
| Port Size: | M3X0.5 | M5X0.8 | |||||
1. Cuniform block is adopted in the interior of the air gripper to afford larger gripper force.
2. The bumper is adopted in the front of piston, which can reduce the noise of metal bump.
3. A positioning hole is attached to the bottom of the body, which can improve the precision and the consistency of repeated dismounting and positioning.
4. Precision repeating snatch which adopted roboticized equipment.
Installation & Usage:
1. Due to the abrupt changes, the circuit pressure is low, which will lead to the decrease of the gripping force and falling of the work-pieces. In order to avoid the harm to the human body and damage to the equipment, anti-dropping device must be equipped.
2. Don't use the air gripper under strong external force and impact force.
3. When install and fix the air gripper, avoid falling down, collision and damage.
4. When fixing the gripping jaw parts, don't twist the gripping jaw.
5. There are several kinds of installation method, and the locking torgue of fastening screw must be within the prescribed torque range shown in the below chart. If the locking torque is too large, it will cause the dysfunctional. If the locking torque is too small, it will cause the position deviation and fall.
