Product Name: RMS RMSF MSFP Series Rodless Cyclinder Product Model: RMS40X300 RMS40X350 RMS40X400 RMS40X450 RMS40X500 Valve Type: Rodless Cyclinder, Cyclinder Brand: AirTAC Fluid: Air Acting Type: Double Acting
Specification：
|
Series Name: |
RMS、RMSL Series | RMSP Series | |||||||
| Bore size: | 16 | 20 | 25 | 32 | 40 | 16 | 20 | 32 | |
| Acting type: | Double Acting | ||||||||
|
Fluid: |
Air(to be filtered by 40μm filter element) | ||||||||
|
Operating Pressure: |
0.15~0.7MPa（22~100psi）（1.5~7bar） | ||||||||
| Proof pressure: | 1.0MPa（145psi）（10.0bar） | ||||||||
| Temperature（℃）: | -20~70 | ||||||||
| Speed rang (mm/s): | 50~400 | ||||||||
| Stroke tolerance: | 0~250(0~+1.0) 251~1000(0~+1.4) 1001(0~+1.8) | ||||||||
| Cushion Type: | Variable Cushion+Fixed Cushion | ||||||||
|
140 |
200 | 360 | 550 | 850 | 140 | 200 | 550 | ||
| Port Size: |
M5X0.8 |
PT1/8 |
PT1/4 | M5X0.8 |
PT1/8 |
||||
①PT thread, NPT thread and G thread are available.
Stroke：
| Bore size(mm) | Standard Stroke(mm) | Max Stroke(mm) |
|
16 |
50 100 150 200 250 300 350 400 450 500 | 1500 |
| 20 | 50 100 150 200 250 300 350 400 450 500 600 700 800 900 1000 | 2000 |
| 25 | 50 100 150 200 250 300 350 400 450 500 600 700 800 900 1000 | 2500 |
| 32 | 50 100 150 200 250 300 350 400 450 500 600 700 800 900 1000 | 3000 |
| 40 | 50 100 150 200 250 300 350 400 450 500 600 700 800 900 1000 | 3000 |
1. This magnetic cylinder is basically a pneumatic rodless cylinder featuring a mobile piston fitted with annular magnets. The mobile carriage is also equipped with magnets to provide magnetic coupling (carriage/piston). The carriage slide freely along the main tube.
2. It is dust-proof as the isolation between the carriage and piston.
3. It is compact in space.
4. The non adjustable rubber bumpers and the adjustable pneumatic cushioning on both ends of the cylinder ensure the smooth action.
2.Horizontal mounting, the permissible radial load must be lower than the figures in the chart below.
3.Vertical mounting, the allowable direction moment must be lower than the figures in the chart below, the dimensions of geometrical can be determined by the relation graph between loading and stroke.
Note) Loading should be used with oriented device, example：
4.Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of impurities into the cylinder.
5.The medium used by cylinder shall be filtered to 40μm or below.
6.If the cylinder is dismantled and stored for a long time, pay attention to conduct anti-rust treatment to the surface. Anti-dust jam cap shall be added in air inlet and outlet ports.
| RMS16X50LB | RMS20X400LB | RMSP16X100LB | RMSP20X500LB | RMSL20X300LB |
| RMS16X100LB | RMS20X500LB | RMSP16X500LB | RMSL16X50LB | RMSL20X400LB |
| RMS16X500LB | RMS25X150LB | RMSP20X300LB | RMSL16X100LB | RMSL20X500LB |
| RMS20X300LB | RMSP16X50LB | RMSP20X400LB | RMSL16X500LB | RMSL25X150LB |
