Dyeing is the process of adding color to textile products like fibers, yarns, and fabrics.[1] Dyeing is normally done in a special solution containing dyes and particular chemical material. After dyeing, dye molecules have uncut chemical bond with fiber molecules. The temperature and time controlling are two key factors in dyeing. There are mainly two classes of dye, natural and man-made.

The primary source of dye, historically, has generally been nature, with the dyes being extracted from animals or plants. Since the mid-19th century, however, humans have produced artificial dyes to achieve a broader range of colors and to render the dyes more stable to resist washing and general use. Different classes of dyes are used for different types of fiber and at different stages of the textile production process, from loose fibers through yarn and cloth to complete garments.

Acrylic fibers are dyed with basic dyes, while nylon and protein fibers such as wool and silk are dyed with acid dyes, and polyester yarn is dyed with disperse dyes. Cotton is dyed with a range of dye types, including vat dyes, and modern synthetic reactive and direct dyes.

Etymology

The word dye is from Middle English deie and from Old English dag and dah. The first known use of the word dye was before the 12th century.

Methods

Dyes are applied to textile goods by dyeing from dye solutions and by printing from dye pastes. Methods include direct application and yarn dyeing.

Direct application

The term "direct dye application" stems from some dyestuff having to be either fermented as in the case of some natural dye or chemically reduced as in the case of synthetic vat and sulfur dyes before being applied. This renders the dye soluble so that it can be absorbed by the fiber since the insoluble dye has very little substantivity to the fiber. Direct dyes, a class of dyes largely for dyeing cotton, are water-soluble and can be applied directly to the fiber from an aqueous solution. Most other classes of synthetic dye, other than vat and surface dyes, are also applied in this way.

The term may also be applied to dyeing without the use of mordants to fix the dye once it is applied. Mordants were often required to alter the hue and intensity of natural dyes and improve color fastness. Chromium salts were until recently extensively used in dyeing wool with synthetic mordant dyes. These were used for economical high color fastness dark shades such as black and navy. Environmental concerns have now restricted their use, and they have been replaced with reactive and metal complex dyes that do not require mordant.

Yarn dyeing

There are many forms of yarn dyeing. Common forms are the package form and the hanks form. Cotton yarns are mostly dyed at package form, and acrylic or wool yarn are dyed at hank form. In the continuous filament industry, polyester or polyamide yarns are always dyed at package form, while viscose rayon yarns are partly dyed at hank form because of technology.

The common dyeing process of cotton yarn with reactive dyes at package form is as follows:

The raw yarn is wound on a spring tube to achieve a package suitable for dye penetration.

These softened packages are loaded on a dyeing carrier's spindle one on another.

The packages are pressed up to a desired height to achieve suitable density of packing.

The carrier is loaded on the dyeing machine and the yarn is dyed.

After dyeing, the packages are unloaded from the carrier into a trolley.

Now the trolley is taken to hydro extractor where water is removed.

The packages are hydro extracted to remove the maximum amount of water leaving the desired color into raw yarn.

The packages are then dried to achieve the final dyed package.

After this process, the dyed yarn packages are packed and delivered.

History of garment dyeing

Garment dyeing is the process of dyeing fully fashioned garments subsequent to manufacturing, as opposed to the conventional method of manufacturing garments from pre-dyed fabrics.

Up until the mid-1970s the method was rarely used for commercial clothing production. It was used domestically, to overdye old, worn and faded clothes, and also by resellers of used or surplus military clothing. The first notable industrial use of the technique was made by Benetton, which garment dyed its Shetland wool knitwear.

Complex garment dyeing

In the mid-1970s the Bologna clothing designer Massimo Osti began experimenting with the garment dyeing technique. His experimentation over the next decade, led to the pioneering of not just the industrial use of “traditional” garment dyeing (dyeing simple cotton or wool garments) but, more importantly, the technique of “complex garment dyeing” which involved dyeing fully fashioned garments which had been constructed from multiple fabric or fiber types (e.g. a jacket made from both nylon and cotton, or linen, nylon and polyurethane coated cotton) in the same bath.

Up until its development by Massimo Osti (for his clothing brand C.P. Company), this technique had never been successfully industrially applied in any context. The complexity lay in developing both a practical and chemical understanding of how each fabric responded differently to the dye, how much it would shrink, how much colour it would absorb, developing entirely new forms of quality control to verify possible defects in fabric before dyeing etc.

Beyond the industrial advantages of the technique (purchasing fabric in one colour, white or natural, you may produce as many colours as you wish etc.), the artistic advantages of the technique were considerable and in many ways paved the way for the creation of the clothing style today known as Italian Sportswear. These advantages included:

the way in which different fibres absorbed the dye’s colour allowed for the creation of incredibly nuanced differences in colour tones and a harmony that is impossible to achieve any other way

the garment dyeing process naturally gave the fabric a"worn-in"hand allowing for the development of the casual and relaxed version of the classic menswear look which characterizes Italian sportswear

the fact that each fabric and fibre type responds differently to the dye also produces a “deconstructed” effect, whereby the consumer’s attention is drawn to the construction techniques of the jacket. For example: a more densely woven fabric absorbs the colour less intensely than a more open weave, the polyester stitching used for a cotton garment does not absorb any dye colour, producing a contrast colour stitch etc.

The disadvantages included:

a relatively high failure rate for garments (between 5-10%)

the difficulty in achieving a very tailored look due to difficulties in precisely calculating shrinkage rates

high research and prototyping costs in order to understand how fabrics will behave in production

Today, whilst garment dyeing is a diffusely employed as an industrial technique around the globe, predominantly in the production of vintage style cotton garments and by fast fashion suppliers, complex garment dyeing is still practiced almost exclusively in Italy, by a handful of premium brands and suppliers who remain committed to the art.

Removal of dyes

If things go wrong in the dyeing process, the dyer may be forced to remove the dye already applied by a process called "stripping" or discharging. This normally means destroying the dye with powerful reducing agents such as sodium hydrosulfite or oxidizing agents such as hydrogen peroxide or sodium hypochlorite. The process often risks damaging the substrate (fiber). Where possible, it is often less risky to dye the material a darker shade, with black often being the easiest or last option.